Pages

Saturday, November 23, 2013

The Fruits of Denial

So here is this innocent-looking iron.


Hard to believe it could wreak such havoc, although I'm afraid I bear the brunt of the blame. About two weeks ago I pulled out a piece I have been working on for a couple of years in order to quilt a section of it. Since it had been rolled for a while a couple of small wrinkles had grown right in the middle of the piece that a quick ironing would remove. When I turned the iron on I noticed a couple of drops on the ironing board but I had just cleaned it the day before and I thought those drops might be left over from the steaming process it goes through and would be fine when it got up to temperature. Wrong conclusion! The quick swipe with the iron that removed the wrinkles left two small ever so slightly discolored circles of water on the white/light blue fabric.

I ran for a dampened paper towel and began blotting and sighed with relief when I held the piece up to light and the stain seemed to have gone. Two hours later it was almost dry and I was not so happy.  The small circles were no longer there but the stain had migrated to the edges of the larger blotted wet spot so the edges of two beautifully shaped circles were faintly inscribed on the piece about three times as big as the original small stains.

After considering abandoning the project--it is an experiment but I have spent quite a bit of time on it and it could turn out to be something interesting--I decided to try one last thing. I would wet down the whole light blue section, hoping the migrating stain would just migrate right off the edges of the piece. Several hours later I breathed a sigh of relief.  The stain was gone except for one small bit that I must not have thoroughly soaked and that will end up in the top seam allowance.

But I was still in denial about the iron, assuming that the whole incident was related to the cleaning process and moving on to the long list of things that must be done before the holidays.  I had used the iron several times on minor jobs and it did leak a couple of drops as it was heating up but seemed to work okay after that UNTIL my son-in-law came to visit.  He was working on a white worsted wool waistcoat that he was sewing by hand (he is a National Park Service ranger and wears this kind of 18th century stuff on the job) and asked to use my iron. I showed him how to turn it on, waited to let it get up to temperature before he used it and left, only to hear my daughter say, "Oh, no" a few minutes later. And, to my horror, there were two small stains on that beautiful waistcoat.

Our first blotting effort did not even completely remove the stains and migrated part of them to the edges of the blotting circles. Jim was handling this better than I was but we were both upset.  My daughter suggested a little soap on the original stain and I suggested wetting the whole thing down, hoping the wool and the silk lining would handle it okay. By the evening it was looking good and by the next morning it was dry and clear of stains!

And the iron began to regularly leak just a little. So am I ready to swear off this brand forever and write a nasty blog post about the company--or am I ready to swear off steam, as Ricky Tims has done because "all irons become incontinent"?  No to both of those. I still find steam very handy in a number of situations and about eight years ago I did extensive research when an iron failed shortly after I purchased it and I read some words of wisdom from a consumer researcher who said that the average life of any iron, no matter what you pay for it, is 2 1/2 years. His advice was to buy a medium priced iron that does the things you want.  I love the Black & Decker Digital Advantage--it heats quickly and well, has lots of steam, and is a good weight for my hand and shoulder.  And this iron (ordered Oct. 29, 2009) that costs about $44 lasted over four years! I have just ordered another.  Not sure what I can do about my ability to deny reality. . . .

And if you are still with me, thanks for the company!

4 comments:

IHaveANotion ~ Kelly Jackson said...

I thought you used a Reliable Iron, they don't leak. However, they are not $44 either. I'm glad you got the stain out, what a relief.

Smiles,
Kelly

Susan said...

I'm glad that you were able to get the stains out!

I stopped putting water in my irons a long time ago, because as you pointed out, they all eventually leak! I keep plain water in a spray bottle for times when I need a little more than just heat.

Gypsy Quilter said...

Ohh my goodness. Might I suggest instead of using the steam feature and depleting the life of your iron, perhaps a spray water bottle. Remember those sprinkle caps our mothers used when sprinkling clothes for ironing? A spray bottle works better and you can often find good ones at the Dollar Store.

Unknown said...

stains!! bane of my life....... Every new blouse splat. I have found a product that I love - pricey - but it works. The name is Stain Solver and although it does not work on wool or silk it is great on other fabrics. check them out they have saved me a few times.